Suzuki Outboard Motor I SS Series DF250SS

$18,900.00

Specifications

Starting System Electric
Transom Height (in) L:20, X:25
Weight kg (Ibs.)*1 L:262 (578), X:275 (606)
Valve Train DOHC 24-Valve
Valve Train Drive Chain
Piston Displacement (cc) 4028
Maximum Output (HP) 250
Bore×Stroke (mm) 97 x 97
Operating Range (rpm) 5,300 – 6,300
Fuel Delivery System Multi-Point Sequential Fuel Injection
Oil Pan Capacity (L) 8.0 (L)
Alternator 12V 54A
Trim Type Power Trim and Tilt
Gear Ratio 2.08:1
Control System Remote
Recommended Fuel 87 Octane
Standard Propeller (in) Optional
Propeller Selection (Pitch) 17″-30”

Description

Suzuki Outboard Motor I SS Series DF250SS For Sale

SUZUKI’S 250SS STARTED IT ALL

The first V6 4-Stroke that was specifically built to power tournament Bass Boats, larger Flats Boats, performance Pontoon Boats and even serious Ski Boats. The other guys were quick to notice and built a few copy cat outboards. But nothing comes close to the DF250SS… a Big Block “Hot Rod” that will put an ear-to-ear grin on the face of any boater with a need for speed and power. The DF250SS comes standard in a Matte Black finish.

Suzuki_tilt_limit_system

TILT LIMIT SYSTEM

To protect the boat and motor from damage that can occur when tilting the motor, both outboards incorporate a user adjustable tilt limit switch that prevents the outboard from tilting beyond a predetermined point.

continuously_variable_valve_timing_Suzuki

CONTINUOUSLY VARIABLE VALVE TIMING

The DF250 incorporates Suzuki’s advanced Variable Valve Timing (VVT). VVT is used to alter intake timing with the camshaft to optimize camshaft timing for low to mid-range operation. Combined with the outboard’s aggressive cam profile VVT delivers greater low to mid-range torque for powerful acceleration.

air_flow_multi_stage_induction_diag_Suzuki

MULTI STAGE INDUCTION

Suzuki’s Multi-Stage Induction system is used to increase engine performance. Each cylinder in this system is equipped with a set of short and long intake manifolds that are utilized in relation to engine speed. At lower rpm the longer pipes deliver an optimum volume of fresh air into the chamber, improving combustion and boosting low-end torque. At higher rpm, the valve on the shorter, direct intake pipe opens up letting air in the chamber directly boosting high-speed power output. (DF250/225)

Suzuki_offset_drive_shaft

OFFSET DRIVE SHAFT

Pioneered by Suzuki, the use of the offset drive shaft on four-stroke outboards has long been utilized to reduce the size of the outboard. Found on all Suzuki four-strokes from the DF70A and up, this design positions the crankshaft in front of the drive shaft simultaneously moving the outboard’s center of gravity forward. While the design contributes greatly to the outboard’s overall compactness and increased power performance, it also moves the engine’s axis of inertia, the point where engine vibrations are at a minimum, up over the upper engine mount, thus greatly reducing vibration. These outboards also incorporate two-stage gear reduction designed to take maximum advantage of the power produced by these high-performance engines.

Reviews

There are no reviews yet.

Be the first to review “Suzuki Outboard Motor I SS Series DF250SS”

Your email address will not be published. Required fields are marked *